Basic Info.
Type
Waterproof Roll Material
Ceiling Tile Type
Fiberglass Ceilings
Transport Package
with PE Shrink Film and Pallet
Product Description
Cheap Price Material Polyethylene Polypropylene Waterproof Roofing Membrane
Features:(1)SBS/APP modified bitumen waterproof membrane
(2)conforms to the national standards
(3)embossed belt and PE waterproof membrane
(4)technique: spunbond
(5)length of roll
(6)core material:polyester mat or composite matCharacteristic:(a)SBS modified bitumen waterproof membrane is specially used as waterproof material in cold area
(b)APP is specially suitable for areas of high temperature and of strong sun-shine
(c)Good performance in Good impermeability anti-puncture, anti-broker, anti-resistance, anti-erosion, anti-mildew,anti-weathering
SBS modified asphalt waterproofing membrane, the membrane has a very good temperature resistance, can be -25 to +100 degrees Celsius temperatureWithin the scope of use, there is a high flexibility and fatigue resistance,as well as high elongation of 1500% and a strong ability to puncture resistant,Tear resistance. Suitable for cold
regions, as well as the deformation and vibration of large industrial and civil construction of waterproof engineering.
Performance characteristics:
Low temperature flexibility is good, to achieve -25 degree is not crack; heat resistant
performance is high, 90 degrees Celsius does not flow. Good extension performance, useLong life, simple construction, small pollution and so on. The product is suitable for the waterproof engineering of I and II, especially suitable for low temperatureBuilding waterproofing works in the area of cold regions and structural deformation.
Specification classification:
According to the physical index is divided into: I (-20 degrees C), II (-25 degrees C) two categories;According to gestational can is divided into: polyester, glass fibre reinforced two categories; according to the covering material can be divided into: PE film (film), sand, shale, sand and other four categories;
width: 1000mm, 10m long and 15m two specifications;
thickness: 3mm, 4mm, polyester felt roll 5mm; 3mm, 4mm glass fiber mat sheet; glass fiber reinforced polyester felt roofing 5mm
Scope of application: widely used in industrial and civil building roofing, basement, toilet and other waterproof works as well as Roof garden,Road,bridge, tunnel, car park, swimming pool and other works of waterproof and moisture.
Technical parameter
No. | Base | Polyester | Composite |
Model | I | II | I | II |
1 | Soluble content g/m2 | 2mm | 1300 | 1300 |
3mm | 2100 |
4mm | 2900 |
2 | Impermeability | Pressure Mpa≥ | 0.3 | 0.2 | 0.3 |
Maintaining time. mini≥ | 30 |
|
3 | Heat resistance ºC | 90 | 105 | 90 | 105 |
No drop ,No displacement,No flowing |
4 | Tensile force N/mm≥ | Longitudinal | 450 | 800 | 350 | 500 |
Horizontal | 250 | 300 |
5 | Elongation%≥ | Longitudinal | 30 | 40 |
Horizontal |
6 | Low temperature flexibility ºC | -18 | -25 | -18 | -25 |
No crack |
7 | Tear strength N≥ | Longitudinal | 250 | 350 | 250 | 300 |
170 | 200 |
Horizontal | -10 | -20 | -10 | -20 |
Low temperature flexibility ºC | No crack |
|
Products images
Raw materials
Application Methods
1.Make sure the roof deck smooth,clean and dry(Moisture<9%),then apply the surface of roof deck homogeneously with a kind bitumen paint till dry to start application.
2.There are two methods in application:
a)One way is by heating and melting method---Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted (not flowing),then install the membrane fully bonded to the roof deck with overlaps of 5-10cm.
b)The other way is by cold adhesive method---Pour the cold adhesive homogeneously on the roof deck,then roll the membrane to install it to be fully sticked to roof deck.
By heating and melting method and by cold adhesive can be used in alternation in application as requested.
3.After application ,a full serious inspection is required to sure no air bubble,no fold,no falling away etc. to guarantee the waterproof life.
Why choose us?
1. Honest supplier to the worldwide buyers
2. Factory, direct supplier, competitive price
3. More than 20 years of production experience
4. Warm and friendly service and guide
5. Small and big orders are welcome
6. 24-hour service for you
Contact information
Address:
6 Floor, Building B, Tian′an Cyber Park, Changwu Road, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Construction & Decoration, Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 9000
Company Introduction:
Changzhou Benefit Waterproof Equipment Co., Ltd, (Abbreviated as "Benefit") is located in Jiangsu province. (Eastern coastal of centre of China) About100 km far away from Shanghai. "Benefit" is a professional manufacturer which is specialized in researching, producing, marketing and service waterproof equipment. As a private-owned enterprise, we have our own engineers with strong knowledge of bituminous membrane production line. "Benefit" is a famous supplier in the line of waterproof equipment in China, also an important supplier in the international markets. On the basis of absorbing foreign advanced science and technology, our factory has developed various kinds of advanced waterproof equipment plants, and has got many national patents. Our main products are Modified bitumen membrane production line, Self adhesive bitumen waterproof membrane production line and asphalts shingle production line. The factory is strictly in accordance with international quality system to ensure product quality. Our factory pursues the enterprise culture of sincere, realistic and innovation, adheres to the service goal of honesty, customer-oriented and win-win situation. We are looking forward to cooperating with you.