APP / Sbs Modified Bitumen Waterproofing Membrane with Low Price

1.Product description 

SBS modified asphalt waterproofing membrane, the membrane has a very good temperature resistance, can be -25 to +100 degrees Celsius temperatureWithin the scope of use, there is a high flexibility and fatigue resistance, as well as high elongation of 1500% and a strong ability to puncture resistant,Tear resistance. Suitable for cold regions, as well as the deformation and vibration of large industrial and civil construction of waterproof engineering.Performance characteristics: low temperature flexibility is good, to achieve -25 degree is not crack; heat resistant performance is high, 90 degrees Celsius does not flow. Good extension performance, use 

Long life, simple construction, small pollution and so on. The product is suitable for the waterproof engineering of

I and II, especially suitable for low temperatureBuilding waterproofing works in the area of cold regions and
structural deformation.Specification classification: according to the physical index is divided into: I (-20 degrees C),
II (-25 degrees C) two categories;According to gestational can is divided into: polyester, glass fibre reinforced two
categories; according to the covering material can be divided into: PE film (film), sand, shale, sand and other four
categories; width: 1000mm, 10m long and 15m two specifications; thickness: 3mm, 4mm, polyester felt roll 5mm;
3mm, 4mm glass fiber mat sheet; glass fiber reinforced polyester felt roofing 5mmScope of application: widely
used in industrial and civil building roofing, basement, toilet and other waterproof works as well as Roof garden,
Road, bridge, tunnel, car park, swimming pool and other works of waterproof and moisture. The extension
performance of the project proposed by the deformation is larger.Excellent polyester tire products, other
construction should choose the relative economic fiberglass products. Construction methodConstruction method:
before the construction should clear the basic level defects, water content is not more than 9%, brushing special
base oil and fully dryRe construction. The concrete engineering construction and detail structure should be in
accordance with the waterproof design, acceptance criteria and construction specifications of the project.
- basic requirements of dry, smooth, clean, no dust, no debris, no oil, no moss spots, such as holes, holes, cracks
should be used
The cement mortar is filled, the prominent part to chisel.
The to wind brushing primer.
- on the surface and the surface of membrane adhesive coated, and set aside to overlap edge brushing glue joint.
The paving material, and exhaust, compaction.
The of lapped seam paste.


2.Product Features
 1. The modified bitumen waterproofing roofing membrane self-adhesive SBS roll is widely used in construction
industry for waterproofing project. 
 2. Self adhesive SBS roll have good roof leakage proof effect.  
 3. Modified bitumen waterproofing roll is eco-friendly, non-toxic and odor-free. 
 4. The modified bitumen waterproofing membrane is tough and tensile and very easy to use. 
 5. The asphalt SBS modified bitumen waterproof rolls meet ISO, CE, GOST standard. 

3.Production Application

SBS/APP Modified Bitumen Membrane (Bituminous Membrane) is widely used in industrial and civil buildings, such as roof, basement,toilet, bridge, park, swimming pool, tunnel for waterproof and moistureproof. Bitumen is kind of hydrocarbon and is created naturally from crude oil.It is a useful carbon store and does not generate greenhouse gases. The membrane is therefore a sustainable way of storing carbon on the Earth's surface.

4.Raw materials


5.There are two methods in application:
(a)One way is by heating and melting method.Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted (not flowing),then install the membrane filly bonded to the roof deck with overlaps of 5-10cm.
(b)The other way is by cold adhesive method.Pour the cold adhesive homogeneously on the roof deck, then roll the membrane to install it to be fully sticked to roof deck.
(c)After application,a full serious inspection is required to sure no air bubble,no falling away.etc.

6.Contact information

Why choose us?
1. Honest supplier to the worldwide buyers
2. Factory, direct supplier, competitive price
3.  More than 20 years of production experience
4. Warm and friendly service and guide
5. Small and big orders are welcome
6. 24-hour service for you